Kontron NSN2U IP Network Server Uživatelský manuál stáhnout pdf (Strana 70)

5. Remove the SAS/SATA control module or the SAS/SATA hardware RAID module, if

installed.

See Section 4.3, “Installing a SAS/SATA Control Module” or Section 4.4, “Installing

a Hardware RAID Module” for help with how these modules are fastened.

6. Remove the bridge board. For instructions, see “Removing the Bridge Board” in

Section 5.3.

7. Disconnect all cables attached to the backplane board.

8. Remove the backplane retention bar by loosening the three screws that fasten it to

the drive bay assembly. (Figure 56, “A”)

9. Lift the retention bar up and out of the chassis and then lift out the backplane

board. (“B”)

Figure 56. Removing the Backplane Retention Bar

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 102 103

Žádné komentáře

Kontron NSN2U IP Network Server Uživatelský manuál Strana 70