Kontron AM4101 Uživatelský manuál stáhnout pdf (Strana 27)

AM4101 Introduction

ID 1022-5406, Rev. 1.0 Page 1 - 11

P R E L I M I N A R Y

LEDs

Module Management

LEDs

• LED1 (red): Out-of-Service LED

• LED2 (red/green/amber): Health LED

• HS LED (blue): The hot swap indicator provides basic feed-

back to the user on the hot swap state of the

module. The HS LED states are off, short

blink, long blink, and on.

User-Specific LEDs

• ULED3 (red/green): AMC Ethernet port A link signal status or

POST code LED

• ULED2 (red/green): AMC Ethernet port B link signal status or

POST code LED

• ULED1 (red/green): Freely configurable or POST code LED

• ULED0 (red/green): Freely configurable or POST code LED

Timer

Watchdog Timer • Software-configurable, two-stage Watchdog with programmable timeout

ranging from 125 ms to 256 s in 12 steps

• Serves for generating IRQ, hardware reset or both in cascaded mode

System Timer

• Two groups of four global 32-bit timers clocked with MPX clock or RTC

clock input

• Timers within each group can be joined to time longer durations

• Hardware delay timer for short reliable delay times

IPMI

Module Management

Controller

• Renesas H8 microcontroller with 40 kB RAM and redundant 512 kB

MMC Firmware Flash with automatic roll-back strategy

• The MMC carries out IPMI commands such as monitoring several on-

board temperature conditions, board voltages and the power supply sta-

tus, and managing hot swap operations.

• The MMC is accessible via a local IPMB (IPMB-L) and Keyboard Style

Interfaces (KCS).

Hot Swap The AM4101 has full hot swap capability.

Thermal Management CPU and board overtemperature protection is provided by:

• Four temperature sensors for monitoring the board temperature

• CPU internal sensors

• Specially designed heat sinks

General

Power Consumption For further information, refer to Chapter 5, “Power Considerations”.

Temperature Range Operational: -5°C to +55°C

Storage: -40°C to +70°C

Mechanical Single Module:

• Mid-size version

• Full-size version

Dimensions Mid-size: 181.5 mm x 73.5 mm x 18.96 mm

Full-size: 181.5 mm x 73.5 mm x 28.95 mm

Board Weight Mid-size: 261 grams (with heat sink)

Full-size: 304 grams (with heat sink)

JTAG Two JTAG interfaces:

• One processor JTAG interface routed to the onboard debug connector

for debugging purposes

• One onboard JTAG interface connected to the AMC Card-edge connec-

tor for debugging and manufacturing purposes

Table 1-2: AM4101 Main Specifications (Continued)

AM4101 SPECIFICATIONS

1 2 ... 22 23 24 25 26 27 28 29 30

P R E L I M I N A R Y 1
Introduction 17

Komentáře k této Příručce

Žádné komentáře

Kontron AM4101 Uživatelský manuál Strana 27

Komentáře k této Příručce

Související produkty a manuály pro Hardware Kontron AM4101