Kontron AT8404 CLI Uživatelský manuál stáhnout pdf (Strana 217)

AT8404 Utility Commands

Page 4 - 3 AT8404 CLI Reference Manual

4.2 Dual Image Commands

FASTPATH software supports a dual image feature that allows the switch to have two software images in the

permanent storage. You can specify which image is the active image to be loaded in subsequent reboots. This

feature allows reduced down-time when you upgrade or downgrade the software.

4.2.1 delete

This command deletes the supplied image file from the permanent storage. The image to be deleted must be a

backup image. If this image is the active image, or if this image is activated, an error message displays.

4.2.2 boot system

This command activates the specified image. It will be the active-image for subsequent reboots and will be loaded

by the boot loader. The current active-image is marked as the backup-image for subsequent reboots.

4.2.3 show bootvar

This command displays the version information and the activation status for the current active and backup images.

The command also displays any text description associated with an image. This command displays the switch

activation status.

4.2.4 filedescr

This command associates a given text description with an image. Any existing description will be replaced.

4.3 ATCA commands

4.3.1 set board sensor threshold

This command sets a new threashold value for a sensor. The <record-id> (of SDR) for a specific sensor is displayed

by the related “show” command

Mode Priviledged EXEC

Format delete {image1 | image2}

Mode Privileged EXEC

Format boot system

<image-file-name>

Mode Privileged EXEC

Format show bootvar

Mode Privileged EXEC

Format filedescr {image1 | image2} <text-description>

Mode Privileged EXEC

Format set board sensor threshold <record-id> <value-type> <value>

Mode Priviledged EXEC

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 372 373

Žádné komentáře

Kontron AT8404 CLI Uživatelský manuál Strana 217