Kontron AM4150 U-Boot Bootloader Uživatelský manuál stáhnout pdf (Strana 29)

AM4150 U-Boot Bootloader U-Boot Usage

ID 1052-5678, Rev. 1.0 Page 29

P R E L I M I N A R Y

USAGE: Select new base configuration

COMMAND / RESPONSE:

=> sconf select 1

New base configuration 1

Configure parameter for new base configuration

COMMAND / RESPONSE:

=> sconf set

Board’s Port Configuration:

Option

Setting | Value # command, option <and parameter>

-----------------------------------------------------------

DTSEC4 routing : port1 # sconf set dtsec4 <port1 | front>

SRIO Sys.Size : large # sconf set srio <small | large>

SRIO mode : agent # sconf set srio <agent | host >

AMC Port Activation / Forced settings (ignoring E-Keying):

Option

Setting | Value # command, option <and parameter>

-------------------------------------------------------------

Port 2 : auto # sconf set port 2 < auto | disable | enable>

Port 4 : auto # sconf set port 4 < auto | disable | enable>

speed : @5.0 # sconf set port 4 < @5.0 | @2.5 >

Port 8 : auto # sconf set port 8 < auto | disable | enable>

speed : @5.0 # sconf set port 8 < @5.0 | @2.5 >

Note: A port’s speed configuration becomes effective if the port is

enabled when running the module in unmanaged mode, or the port is

forcibly enabled (i.e. not set to ‘auto’) in managed mode.

=> sconf set port4 disable

Display current “sconf” status

COMMAND / RESPONSE:

=> sconf status

Configuration (Activation) Status:

Module is running: managed (E-Keying)

sconf disables E-Keying: no

sconf deactivated by DIP SW: no

Configuration (stored) is active:

AMC Base Configuration: 0

sconf (continued)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

Žádné komentáře

Kontron AM4150 U-Boot Bootloader Uživatelský manuál Strana 29