Kontron CG2100 Carrier Grade Server Uživatelský manuál stáhnout pdf (Strana 26)

Removing the Processor Air Duct

The processor air duct is black plastic with rubber grommets that reduce vibration. It

must be removed to access the processors and the memory DIMMs. The air duct is

required to ensure proper air flow within the chassis, so be sure that it is in place

again before re-installing the back cover.

To remove the processor air duct:

1. Power down the server and remove all peripheral devices and the power cord(s)

2. Remove the back chassis cover. For instructions, see “Removing the Chassis Covers”.

3. Remove the riser card assembly. For instructions, see “Removing the Riser Card

Assembly”.

4. Slide the air duct back to free it from the fan bracket and towards the center of

the chassis to free it from the edge. (Figure 14, “A”)

5. Lift the air duct straight up to remove it.

Figure 14. Removing the Processor Air Duct

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 109 110

Žádné komentáře

Kontron CG2100 Carrier Grade Server Uživatelský manuál Strana 26