Kontron NSC2U IP Network Server Uživatelský manuál stáhnout pdf (Strana 37)

Kontron IP Network Server NSC2U

December 2009 Product Guide, rev. 1.4

Server Component Installations and Upgrades—NSC2U Server

Note: DDR2 DIMMs that are not fully buffered are not supported on the T5000PAL server

board. See the Server Configurator at

http://www.cmtlabs.com/mbSearchResults.asp?sManuf=Kontron&sMem=FB-

DIMM&sMN=S5000PAL&oSubmit=Search

for a complete list of supported memory.

3.4.2.3 DIMM Population Rules and Supported DIMM Configurations

DIMM population rules depend on the operating mode of the memory controller, which

is determined by the number of DIMMs installed. DIMMs must be populated in pairs.

DIMM pairs are populated in the following DIMM slot order:

1. A1 and B1

2. C1 and D1

3. A2 and B2

4. C2 and D2

DIMMs within a given pair must be identical with respect to size, speed, and

organization. However, DIMM capacities can be different between different DIMM pairs.

For example, a valid mixed-DIMM configuration may have:

• 512 Mbyte DIMMs installed in DIMM slots A1 and B1

• 1 Gbyte DIMMs installed in DIMM slots C1 and D1

The supported DIMM configurations for the T5000PAL server board are given in

Table 10.

Table 8. Maximum 8 DIMM System Memory Configuration - x8 Single Rank

DRAM Technology

x8 Single Rank

Maximum Capacity

Mirrored Mode

Maximum Capacity

Non-Mirrored Mode

256 Mb 1 GB 2 GB

512 Mb 2 GB 4 GB

1024 Mb 4 GB 8 GB

2048 Mb 8 GB 16 GB

Table 9. Maximum 8 DIMM System Memory Configuration - x4 Dual Rank

DRAM Technology

x4 Dual Rank

Maximum Capacity

Mirrored Mode

Maximum Capacity

Non-Mirrored Mode

256 Mb 4 GB 8 GB

512 Mb 8 GB 16 GB

1024 Mb 16 GB 32 GB

2048 Mb 16 GB 32 GB

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 151 152

Komentáře k této Příručce

Žádné komentáře

Kontron NSC2U IP Network Server Uživatelský manuál Strana 37

Komentáře k této Příručce

Související produkty a manuály pro Počítačový hardware Kontron NSC2U IP Network Server